pat_986 0 Posted January 17, 2010 Report Share Posted January 17, 2010 Sorry to ask such a beginner question, but i just got a new hub after the old's ones bearing fell apart and damaged the old one.Im not sure if this new one needs a new bearing as well? the part in the picture pushes by hand into the main hub carrier. Is that correct, or should it need to pushed in with a press?Also, there is a bit of damage on the face where someone has smacked it with a hammer?Cheers Link to post Share on other sites
CALICO 130 Posted January 18, 2010 Report Share Posted January 18, 2010 worth replacing it for the cost as its all apart anyway just to be on the safe side Link to post Share on other sites
pat_986 0 Posted January 18, 2010 Author Report Share Posted January 18, 2010 I know, but its meant to be a new bearing, and its just hassel as I need to get a garage to fit it, as I dont have a Press! Link to post Share on other sites
CALICO 130 Posted January 18, 2010 Report Share Posted January 18, 2010 but its more hassle to take it all back off if its whining or no good most garages have presses and wouldnt charge much more than £10 Link to post Share on other sites
pat_986 0 Posted January 18, 2010 Author Report Share Posted January 18, 2010 Yeah, I know your right, its just that time of year where every £ is precious! Link to post Share on other sites
Recommended Posts