davee 0 Posted January 10, 2010 Report Share Posted January 10, 2010 right ive been looking up previous treads on vr6 remaps im even more confused nowi have an obd1 vr6 with a bmc cda,decat,6 branch manny,ans a 2 box stainless exhaustthing is would it be worth my while getting it remapped or is it a waste of time what do yous think? Link to post Share on other sites
cabrioman 6 Posted January 10, 2010 Report Share Posted January 10, 2010 with the mods u have i would save ur money and put some cams in .... its not worth remapping a N/A vr6 untill u have the mods u have plus cams and possible a schrick mainni .... the power gains u will get wont justfiy a remapp imo Link to post Share on other sites
UnitedMotorsport 55 Posted January 10, 2010 Report Share Posted January 10, 2010 Do you have a Dizzy or coil pack engine? Link to post Share on other sites
davee 0 Posted January 10, 2010 Author Report Share Posted January 10, 2010 coilpack i think Link to post Share on other sites
terrorste 0 Posted January 10, 2010 Report Share Posted January 10, 2010 I was thinking about doing this too gonna get a 6branch on first though Link to post Share on other sites
J5KE F 0 Posted January 10, 2010 Report Share Posted January 10, 2010 My caddy van is running a c2 map and it is awsome.. it has a 2.9 rado lump, induction kit, Dubpower r32 6 branch, dubpower ht leads and magnaflow custom exhaust. it sounds and poulls superbly even with an intermittent missfire!depending on your short /. longterm plans. If you are planning suture mods, then hold off but if you are happy with what u have done, then speak with Matt at c2! Link to post Share on other sites
Recommended Posts