Big Ian 1 Posted January 8, 2010 Report Share Posted January 8, 2010 Hi i swapped my 17" DOTZ tonight with a mate for his 17" polished TT Comp's, ive a wee question to ask, how do you get the rear audi centre cap's to stay in place? the wheel bearing cover is pushing the cap's off. is there a way of shaving the cap's or do i need to fit spacer's on the rear for the centre cap's to have enough clearance? thank'sIan Link to post Share on other sites
craggsy 91 Posted January 8, 2010 Report Share Posted January 8, 2010 Either a small spacer.....or hit the cap with a hammer to flatten it.....cap on hub/disc not wheel lol Link to post Share on other sites
Big Ian 1 Posted January 8, 2010 Author Report Share Posted January 8, 2010 thank'si'm replaceing the rear wheel bearing's on both side's over the week end so i'll try flatten them in a little more, i bashed them in slightly when fitting the wheel's but they still got pushed offif that fail's i have a set of 6mm spacer's that i can try. Link to post Share on other sites
BADOIR 2 Posted January 8, 2010 Report Share Posted January 8, 2010 6mm should do the trick , Link to post Share on other sites
Recommended Posts