b19drg 0 Posted October 18, 2009 Report Share Posted October 18, 2009 Hi Guys , If i was to fit these cams on my car would i see much of a benefit ? or do i need to do alot more to make it worth while ? and is it much of a job to change what would a garage charge me ? Link to post Share on other sites
FishWick 21 Posted October 19, 2009 Report Share Posted October 19, 2009 They move the powerband further up the revs.Good cams don't affect the idle or low end. Dougherty racing are good, as are Autotech etc. I've used Schrick's 268s and they definitely make the bottom end flat and give a slightly lumpy idle when the engine's hot.Also consider Autotech 262 and Schimmel 263. Both are very good and improve bottom end aswell as top end. Idle is factory, if not better. Link to post Share on other sites
aaronmk2 3 Posted October 22, 2009 Report Share Posted October 22, 2009 i have to agree the autotech 262 are a good cam coupled with the right mods i.e exaust headwork chip intake you will see good gains. Link to post Share on other sites
cabrioman 6 Posted October 22, 2009 Report Share Posted October 22, 2009 only take a 2-3 hours to change mite wanna think about puttin new tappets in aswell .... Link to post Share on other sites
Recommended Posts