f4rrs 0 Posted August 21, 2009 Report Share Posted August 21, 2009 My oil pressure switches were changed yesterday as they were both leaking oil. The garage has i used has made a mistake and replaced both switched with two black tops. After much research i know understand that you should have one black top and one brown top.My question is the right or left switch the brown one?Many thanks in advance.......Paul Link to post Share on other sites
CALICO 130 Posted August 21, 2009 Report Share Posted August 21, 2009 ive ordered the left one from vw when i pick it up i will let you know what colour it is mines too dirty to see the colour Link to post Share on other sites
craggsy 91 Posted August 21, 2009 Report Share Posted August 21, 2009 It doesnt matter which way in top of filter housing they go as long as you have low and high pressure sensors Link to post Share on other sites
CALICO 130 Posted August 21, 2009 Report Share Posted August 21, 2009 according to my local VW dealer the left one is black and the right one is blue the little one behind is temperature soi would assum the garage have put 1 in wrong Link to post Share on other sites
craggsy 91 Posted August 21, 2009 Report Share Posted August 21, 2009 Correct Roger as ive been playing with them today....dont ask Link to post Share on other sites
CALICO 130 Posted August 21, 2009 Report Share Posted August 21, 2009 i know ive just had to buy one as oil is leaking out of the top of the left hand one which is black. had a look on there computer and showed the other is blue pain in the backside to get to when youv got aircon cant just drop the front off lol Correct Roger as ive been playing with them today....dont askwhat have you been upto now lol Link to post Share on other sites
craggsy 91 Posted August 21, 2009 Report Share Posted August 21, 2009 Well was trying to get a tpiece in to put oil pressure gauge sender in place and tried all 3 places but was not tight enough when facing forward, but when it was tight it either went over other sender or hit air con thingy.So forgot all about it and bought a remote t peice just now on ebay. Round 2 will commence next week! Link to post Share on other sites
MarkGolf 6 Posted August 22, 2009 Report Share Posted August 22, 2009 Im in same boat with the t piece!I need to have my oil pressure and temp gauge in and I found the sensors would all interfere with each other! Let us know how you get on with the remote t piece.. Link to post Share on other sites
CALICO 130 Posted August 22, 2009 Report Share Posted August 22, 2009 whats the t peice for Link to post Share on other sites
J5KE F 0 Posted August 23, 2009 Report Share Posted August 23, 2009 T piece is for additional / upgrade gauges I only kno cos we spent the mornin stripping ours down and ff we didn't have a/c! Link to post Share on other sites
craggsy 91 Posted August 23, 2009 Report Share Posted August 23, 2009 The remote one will be easy as it screws into sensor hole and has 500mm of braided hose to mount it easier else where, but i'll let ya know Link to post Share on other sites
Recommended Posts