sparkyjr 0 Posted June 14, 2009 Report Share Posted June 14, 2009 Thinking of saving some space in my boot and was thinking of putting my sub on the side of the boot like a A3 and putting the amp on the other side.I want to keep it oem to a degree and stay away from the maxpower look.Any one got any guidance as i want to do it my self ? Link to post Share on other sites
CALICO 130 Posted June 14, 2009 Report Share Posted June 14, 2009 http://www.autoacoustics.com/sbn-vg033.htmwill need to be bolted through to bodywork to make it secure Link to post Share on other sites
mat-ryder 2 Posted August 19, 2009 Report Share Posted August 19, 2009 iv got one in mine. i held it in place with velcro on the back and 2 protruding screws on the top which catch onto the cover panel to stop it falling forward Link to post Share on other sites
mike 6 Posted August 19, 2009 Report Share Posted August 19, 2009 http://www.autoacoustics.com/sbn-vg033.htmwill need to be bolted through to bodywork to make it securei have one, there a bit naff to be honest!! dont fit very well at all.. the vecro is useless so u end up drillin holes... and it sticks out really bad cus it fouls where the seat belt roll is kept...and stupidly expensive... make your own,, mdf... ask absy Link to post Share on other sites
ben_notts 0 Posted August 29, 2009 Report Share Posted August 29, 2009 theres a step by step guide on edition for one of these - im gonna do one over winter too.http://www.talkaudio.co.uk/vbb/showthread.php?t=76606hope this helps..B. Link to post Share on other sites
CALICO 130 Posted August 30, 2009 Report Share Posted August 30, 2009 Mine cost £60 of ebay nut and bolted through bodywork then fitted speaker wont fall anywhere or get stolen lol Link to post Share on other sites
Recommended Posts