craggsy 91 Posted April 18, 2009 Report Share Posted April 18, 2009 As title really, tell me what else I should get. A/F meter, boost gauge etc etc. Then its all gonna be in one place when it comes to fitting it Link to post Share on other sites
Charged VR 0 Posted April 18, 2009 Report Share Posted April 18, 2009 I would replace your Fuel pump with a in tank walbro unit. Made mine run so much smoother when on boost. What PSI are you going to run? Link to post Share on other sites
craggsy 91 Posted April 18, 2009 Author Report Share Posted April 18, 2009 Just got 6psi pulley on so low boost for now to get everything running right.....then up it bit by bit Link to post Share on other sites
Charged VR 0 Posted April 18, 2009 Report Share Posted April 18, 2009 I have sent you a PM about the install but i dont think it made much sense. If you PM me your email then i will foward all the pictures. Well worth speaking to Dub Power for lower temp fan switch, thermostat and better HT Leads.Fantastic noise when on boost. You will be in the petrol station loads when you first start driving it, i now i was!!! Link to post Share on other sites
craggsy 91 Posted April 18, 2009 Author Report Share Posted April 18, 2009 Got lower stat and decent leads, been meaning to change rad switch anyway.Keep things coming as always helpful Link to post Share on other sites
craggsy 91 Posted April 18, 2009 Author Report Share Posted April 18, 2009 And i already PMd my email addy to ya Link to post Share on other sites
Charged VR 0 Posted April 18, 2009 Report Share Posted April 18, 2009 I bought my Boost gauge from Revo tec as the only one i could find that said Supercharger instead of the usual boost or turbo.Genearl engine health check, new plugs if old. Good idea too lose the cat Link to post Share on other sites
craggsy 91 Posted April 18, 2009 Author Report Share Posted April 18, 2009 Well its going in to have chains done anyway. Plus getting a played with head. Assuming a new clutch as well. Gotta order engine mounts as well, so wont be able to get a decat just yet...but will be on list Link to post Share on other sites
Charged VR 0 Posted April 18, 2009 Report Share Posted April 18, 2009 Im running standard engine mounts on my 6psi kit. Have you spoken to storm? Well worth a call.If your car has done alot of miles you may see the cat disapear in a cloud of dust out the back!!! Link to post Share on other sites
craggsy 91 Posted April 18, 2009 Author Report Share Posted April 18, 2009 I wanna do mounts anyway as same ones since new 148k ago.....same with cat id assume. Gotta go Storm anyway to get some oil for charger Link to post Share on other sites
Ben Seabrook 4 Posted April 19, 2009 Report Share Posted April 19, 2009 Well its going in to have chains done anyway. Plus getting a played with head. Assuming a new clutch as well. Gotta order engine mounts as well' date=' so wont be able to get a decat just yet...but will be on list[/quote']yeah engine mounts are on my list of things to do - standard clutch should be fine mate as long as your running same sort of power I am 260 ish ? as your getting Dave to do the chains etc and you have new leads, plugs you should be ok to start with - have you got bigger injectors going in as well ? Link to post Share on other sites
Ben Seabrook 4 Posted April 19, 2009 Report Share Posted April 19, 2009 oh and a petrol brand loyalty card - airmiles a plenty !!! Link to post Share on other sites
cabrioman 6 Posted April 19, 2009 Report Share Posted April 19, 2009 and dont forget the silly grin on ur face lol ..... oil temp and oil pressure gauge mite be a good idea .... i only replaced my temp gauge cos the dash one stopped working .... will you need to get it mapped ???? Link to post Share on other sites
Ben Seabrook 4 Posted April 19, 2009 Report Share Posted April 19, 2009 and dont forget the silly grin on ur face lol he has one of those anyway ;)and yeah presumably you will need a remap as well matey - time to pay uncle Vince a call maybe we could make a day off it ? Link to post Share on other sites
craggsy 91 Posted April 19, 2009 Author Report Share Posted April 19, 2009 Remap will be by Andy at Storm as they know the Rotrex Link to post Share on other sites
Ben Seabrook 4 Posted April 19, 2009 Report Share Posted April 19, 2009 how much do Storm charge matey ? Link to post Share on other sites
craggsy 91 Posted April 19, 2009 Author Report Share Posted April 19, 2009 Dunno yet gotta go down on friday to get oil and i'll find out Link to post Share on other sites
Ben Seabrook 4 Posted April 19, 2009 Report Share Posted April 19, 2009 are you getting them to fit it as well ? Link to post Share on other sites
craggsy 91 Posted April 19, 2009 Author Report Share Posted April 19, 2009 nope, can do that myself Link to post Share on other sites
cabrioman 6 Posted April 19, 2009 Report Share Posted April 19, 2009 so does this mean there will now be a `special` section for FI vr`s on here now lol Link to post Share on other sites
Ben Seabrook 4 Posted April 19, 2009 Report Share Posted April 19, 2009 nope' date=' can do that myself[/quote']good man more fun that way as well ! Link to post Share on other sites
Ben Seabrook 4 Posted April 19, 2009 Report Share Posted April 19, 2009 so does this mean there will now be a `special` section for FI vr`s on here now lolnot a bad idea mate Link to post Share on other sites
craggsy 91 Posted April 19, 2009 Author Report Share Posted April 19, 2009 so does this mean there will now be a `special` section for FI vr`s on here now lolNope might get one for Rotrex tho.....lol Link to post Share on other sites
cabrioman 6 Posted April 19, 2009 Report Share Posted April 19, 2009 so does this mean there will now be a `special` section for FI vr`s on here now lolNope might get one for Rotrex tho.....loland you have to be a northan monkey aswell yeah ..... lol Link to post Share on other sites
craggsy 91 Posted April 19, 2009 Author Report Share Posted April 19, 2009 So where to get gauges from then? Come on you lot names and places then Link to post Share on other sites
Recommended Posts