gazchill 0 Posted April 10, 2009 Report Share Posted April 10, 2009 Hi. My local garage replaced this for me to try and fix a very stuborn sensor fault! - It seemed to work although I have a question about bleeding the pump - the garage didnt do this.Should this be done before or after bleeding the brakes at the callipers ? Or doesnt it not matter.Also, could someone confirm the order to bleed. I saw on a forums NSR, OSR, NSF, OSF - but my haynes manual tells me to start on Right Rear which I thought was OSR.Thanks in advance. Link to post Share on other sites
gazchill 0 Posted April 22, 2009 Author Report Share Posted April 22, 2009 Can anyone tell me why during the ABS pump bleed procedure you need to have the car lifted off the ground. See below from VAGCOM site :-"Vehicle must on a lift or safe jack stands with no wheels touching the ground" Link to post Share on other sites
gazchill 0 Posted April 26, 2009 Author Report Share Posted April 26, 2009 ANyone know where and IF the Master Brake Cyclinder has a bleed nipple ? 95/ODB-1 Link to post Share on other sites
cabrioman 6 Posted April 26, 2009 Report Share Posted April 26, 2009 as far as i know it dont have a bleed valve ... and as for the vag com thing that prob for safety and so you can access the bleed nipples cant see why else it needs to be in the air ?? Link to post Share on other sites
Recommended Posts