Bobtrude 0 Posted March 3, 2009 Report Share Posted March 3, 2009 As the text says. Im heading for 15 psi and does anybody know how much flow the T04B can supply? Thanks Link to post Share on other sites
FishWick 21 Posted March 3, 2009 Report Share Posted March 3, 2009 If it's the 0.84 hotside, 0.60 coldside one, then it should do yeah. Link to post Share on other sites
Bobtrude 0 Posted March 3, 2009 Author Report Share Posted March 3, 2009 ok, thanks. Link to post Share on other sites
MaidenVR6 26 Posted March 4, 2009 Report Share Posted March 4, 2009 You have a 63.hotside. And 400whp is not reachable. If they speak about WHP or crank HP in this forum, im not sure. But forget 400 whp on 15 psi on a stock VR6. Link to post Share on other sites
Bobtrude 0 Posted March 4, 2009 Author Report Share Posted March 4, 2009 Gonna have too check. I mean hp . . . . . not whp. 350whp! Link to post Share on other sites
FishWick 21 Posted March 4, 2009 Report Share Posted March 4, 2009 350whp should be doable for a TO4B, but we need to know the exact specs..... wheel sizes, hot and cold side ARs etc etc....If it's a genuine Garrett Turbo, the serial tag in the centre housing should reveal all.... Link to post Share on other sites
Bobtrude 0 Posted March 4, 2009 Author Report Share Posted March 4, 2009 Ok, it IS real . its from ATP. Im gonna check the specs. Its the one supplied in their stage 2 kit. http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-VVW-113&Category_Code=VVWTK Link to post Share on other sites
Bobtrude 0 Posted March 4, 2009 Author Report Share Posted March 4, 2009 Just sendt them an Email so lets see. . . . My car is in storage. Link to post Share on other sites
Bobtrude 0 Posted March 4, 2009 Author Report Share Posted March 4, 2009 From ATP. Q: Hi, what are the specs on the T04B turbo supplied in your stage 2 turbokit?A: It's actually now a T04E 57 trim now.Q: yes but i have the old kit (2005) . . . . .. Would my old T04B be able to deliver 350 wheel HP. . . . approx 1 bar. ? Thanks A: 1 bar 350HP is no problem. It's rated for 440 crank HP so 400WHP is doable. Q: Ok, thanks alot . Just wondering if u have any specs of the hotside / coldside?. . . . . . AR?No answer yet but would imagine the kit uses slightly the same turbo . . . . Link to post Share on other sites
FishWick 21 Posted March 4, 2009 Report Share Posted March 4, 2009 Sounds good then. If it is a TO4E, that's defo capable of 400whp :-) Link to post Share on other sites
jims13 6 Posted March 4, 2009 Report Share Posted March 4, 2009 thats what i have.. good turbo, if a little on the large size.. pulls well. mines making 17psi now, with the correct fueling and ecu remaped.. pulls like a jet ( sound like one 2 ) Link to post Share on other sites
Recommended Posts