corradogang* 0 Posted September 25, 2004 Report Share Posted September 25, 2004 ive been trying to get my bumper off 4 ages so i can refix the one side of it to the bracket , ive taken of all the bolts at the bottom of the bumper but cannot find the other ones . :! does anyone know?cheers Link to post Share on other sites
binliner 0 Posted September 25, 2004 Report Share Posted September 25, 2004 not sure on a corrado but on a golf if you remove the front grill there are 3 bolts there as well - assuming we're talking about the front bumper that is Link to post Share on other sites
corradogang* 0 Posted September 25, 2004 Author Report Share Posted September 25, 2004 yes its the front bumper .when ive removed the grill there is no bolts to be seen .thanx anyway Link to post Share on other sites
mightyvr6 0 Posted September 25, 2004 Report Share Posted September 25, 2004 You have to take the 2 subframe bolts out. If you look undeneath at the front subframe there should be a large (think they are 17 mm) bolt on either side next to a 13mm bolt. Remove both the 17mm bolts and the bumper should slide out. Link to post Share on other sites
corradogang* 0 Posted September 25, 2004 Author Report Share Posted September 25, 2004 is there r either side of the car small botlt in the middle and larger bolts on the outside? Link to post Share on other sites
mightyvr6 0 Posted September 25, 2004 Report Share Posted September 25, 2004 yes, remove the 2 large bolts and leave the small bolts in on both sides. The small bolts are holding the subframe on, so it's probably best to leave some axle stands under the subframe whilst the large bolts are out. Link to post Share on other sites
Recommended Posts