JasonBourne 0 Posted February 11, 2008 Report Share Posted February 11, 2008 Just a quick question, I am in the middle of a mk2 conversion and am using the Corrado subframe/steering rack. The end of the steering column doesn't fit onto the Corrad rack. I spoke to someone and he said I would need the whole corrado steering column. Can I not just modify the corrado one (if I got my hands on it) to produce a frankenstein?And one other thing, I saw a few on e-bay but they were £60-70. Seems a bit steep to me. Link to post Share on other sites
vdubgirl 3 Posted February 11, 2008 Report Share Posted February 11, 2008 AS far as I know because of how you are doing your conversion with the raddo goodies you will need the raddo steering column.Why don't you use the original Mk2 power steering rack???Also great place for Mk2VR6 conversion advise can be found here >>> www.mk2vr6.com Link to post Share on other sites
JasonBourne 0 Posted February 12, 2008 Author Report Share Posted February 12, 2008 The steering rack on my old car isn't PAS. And of course before I realised this problem I got new track rod ends and rubber boots and refurbed the steering rack! Link to post Share on other sites
1985gti 0 Posted February 24, 2008 Report Share Posted February 24, 2008 mines a lhd drive,couldnt find a power rack to go on it so i used my original non p/s rack and its fine!im actually glad i did you can feel the car better.... Link to post Share on other sites
kilokilla 0 Posted April 16, 2008 Report Share Posted April 16, 2008 All you need is the knuckle that goes from the rack to the bottom of steering column for a power steered mk 2 or rado mate not the whole column Link to post Share on other sites
Recommended Posts