muffy 0 Posted August 31, 2004 Report Share Posted August 31, 2004 does anyone have any iformation /experience on camshafts and which would be a good choice to go for ,for improved performance, bhp.thanks Link to post Share on other sites
VR6Steve 0 Posted August 31, 2004 Report Share Posted August 31, 2004 I have a set of 264 degree Kent Cams in mine. The idle is a little rough. Apparently Schrick 260/264 degree is the way to go. They do not give quite as much power gain but a completely smooth idle.With the cams/chip and a K&N panel filter my was rolling roaded at 197bhp at the fly by Stealth. Off the top of my head it was 189 with the cams and filter. The whole package pulls really well up the rev range. Link to post Share on other sites
speedo 0 Posted September 3, 2004 Report Share Posted September 3, 2004 I run 264`s. stick to schrick. it`s the only cams that work. Link to post Share on other sites
muffy 0 Posted September 4, 2004 Author Report Share Posted September 4, 2004 I have a set of 264 degree Kent Cams in mine. The idle is a little rough. Apparently Schrick 260/264 degree is the way to go. They do not give quite as much power gain but a completely smooth idle.With the cams/chip and a K&N panel filter my was rolling roaded at 197bhp at the fly by Stealth. Off the top of my head it was 189 with the cams and filter. The whole package pulls really well up the rev range. Link to post Share on other sites
Recommended Posts