shaunnorris7 1 Posted November 23, 2007 Report Share Posted November 23, 2007 Last weekend I bought a pair of recaro seats for my project Vento out of a st220 (same as in a S3) which have runners designed to be mounted flat on the floor. As most people woill know the runners are side mounted in a golf/vento. So how is the best way to go about this? I was thinking of getting another set of seats out of one from a scrap yard and ripping the seat off so I'm just left with the runners etc. Then taking the frame work off the recaro's and welding some metal plates to the mk3 frames and then mount the seat top that. If any of this makes sense let me know or if there is another way which would be alot easier....HELP!!! Link to post Share on other sites
jezmoz 0 Posted November 23, 2007 Report Share Posted November 23, 2007 you need to weld mk3 sub frames on em in place of the current sub frame I would say Link to post Share on other sites
SankysVR6 1 Posted November 23, 2007 Report Share Posted November 23, 2007 If they are reacaro seats can you not unbolt the runners and just go buy some new recaro runners for the mk3, if that makes sense. Link to post Share on other sites
shaunnorris7 1 Posted November 24, 2007 Author Report Share Posted November 24, 2007 Thats what I thought, but after speaking to several companies about it they said its ok for after-market seats but these are standard seats from a st220 the runners will be different as all the fitments are different. Think the cheapest and easiest way is to just take the recaro and fix it to my current runners after some adapting.... Link to post Share on other sites
Recommended Posts