Jump to content

Recommended Posts

The hose from my FPR to the inlet manifold has split at the end So i cut it down a little to get rid of the damaged area but i couldn't get the clips off the hose.

I've put a couple of cable ties to hold it as tight as i can until i can get a new piece of hose from the dealers. Is this going to be safe to drive like this, there isn't going to be a load of fuel coming out here is it.

Link to post
Share on other sites

Its the hose that comes off the silver circle thing on the fuel rail, I think its the fuel pressure regulator.To late for Halfords now as it will be closed, could try a petrol station to see what they have.

I think i might have damaged the hose slightly when i took the manifold off for polishing. As i just pulled it off with clips on.

Link to post
Share on other sites

ah that is a vaccum hose mate wont get any fuel comin out of there so no need to stress adn worrie

a small pipe on the right of the main as u look at it and god from the main to the silver thing yeah ... and yes it a the fuel pressure regulator

Link to post
Share on other sites

bugger all mate go to any car spares place adn u should be able to get it just show them and im sure they will have a piece in stock main stealer prob sell u a lenght ..... and it all good for a quick response i just love v dubs thats y i work for them lol

Link to post
Share on other sites

Thanks will pop down this afternoon.

Just to let people know the reason i was looking in this area was that i was getting poor mpg then i ushally get on the way to work. But with temp. fix i used, the mpg on the work trip was back to normal.

Link to post
Share on other sites
×
×
  • Create New...