Guest baynham Posted February 27, 2007 Report Share Posted February 27, 2007 i need advice on how to remove a heater matrix from a mk3 vr6 in steps please as im going to attempt it myself Link to post Share on other sites
VR6Pete 1,455 Posted May 25, 2007 Report Share Posted May 25, 2007 wouldnt mind knowing my self actually, ive got the dash out, but still need to get the matrix and all my wiring loom out! Link to post Share on other sites
IbiVR 0 Posted May 25, 2007 Report Share Posted May 25, 2007 Dash out is easiest way.Pete, in your engine bay on the bulkhead you'll see 3 10mm bolts, with big washers on done up onto about 20mm of thread sticking out. 2 in the middle one on top of the other and one near the top on the pass side. Undo all 3 and the whole heater box should come out if everything inside is undone. Pull it directly backwards as you need the length of the thread to get through the holes.Then the matrix just pulls out the top.Tom. Link to post Share on other sites
VR6Pete 1,455 Posted May 25, 2007 Report Share Posted May 25, 2007 cheers mate, will give that ago no wonder I couldnt see any bolts on the inside. lol Link to post Share on other sites
Recommended Posts