c4mbl 1 Posted February 4, 2007 Report Share Posted February 4, 2007 Both my back windows wont work so i gather i need new motors. I have two doors in my garage with motors in them and started today to strip the donor door down, which is a complete pain.Does any one have a guide on how to do them properly, its handy ripping the donor door to shreds but id rather avoid doing that to mine, lol!!Thanks guys!!! Link to post Share on other sites
petervr6 0 Posted February 5, 2007 Report Share Posted February 5, 2007 have you checked the wires in the doors mate same thing happend to my 5dr if you open the door were the door catch is there should be a black rubber pull it back and a bet there is a broken wire in there both sides like i said same think happen to mine. Link to post Share on other sites
c4mbl 1 Posted February 7, 2007 Author Report Share Posted February 7, 2007 hey peter, checked the wires today and the drivers side was snapped so i joined it back together, tried the window, and still the same.The drivers side rear window, when i press the button to put it down, makes a clicking noise.The passenger rear does nothing at all, no clicking etc.What do you suggest??thanks alot. Link to post Share on other sites
petervr6 0 Posted February 7, 2007 Report Share Posted February 7, 2007 ok the side thats clicking sounds like the motor could be seized the other size ? best thing to do pop doen to halfors or similar a get a tester make sure your getting power to the size thats doing nothing or take the door cards off and unplug the motors a give them a direct feed then if nothig happen the motor must be nackerd and if the other side is seized you will be best to replace it. Link to post Share on other sites
Recommended Posts