Ronan 0 Posted April 20, 2015 Report Share Posted April 20, 2015 So yesterday I started having issues selecting first and second, managed to fight through it, and this morning I can't get it into reverse. In face, first and second are where reverse should be - i.e. pushing down on the stick and going left. There's another topic in here which shows a video of the adjustment process, but there's not the spring loaded holders on the cables that there in that video...Can someone point me in the right direction of the right part to adjust? Link to post Share on other sites
ssaunders 199 Posted April 23, 2015 Report Share Posted April 23, 2015 Hi Mate, had the same with mine after a gearbox swap. see herehttp://www.myturbodiesel.com/wiki/how-to-adjust-your-vw-and-audi-manual-shifter-cables/i would suggest its a 2 person job, 1 to adjust and 1 to check the gears as otherwise your will be jumping in and out of the car as even a mm makes a big difference, hopefully its just a loose bolt and you should be able to see where it was sat originally.good lucks VR6CABBS 1 Link to post Share on other sites
Recommended Posts