Jump to content

Vince12v

Members
  • Content Count

    215
  • Joined

  • Last visited

Everything posted by Vince12v

  1. Yea that's what I'm after, I'm told it frees up Afew ponies too Sent from my iPhone using Tapatalk
  2. I got a miltek at the moment, but want somethin abit bigger, help it breath Sent from my iPhone using Tapatalk
  3. Ahh nice, what's the sound like compared to the miltek? Sent from my iPhone using Tapatalk
  4. Anyone tried the 2.5" dubpower exhaust system, it looks good quality for a good price! Anyone kno any better? Sent from my iPhone using Tapatalk
  5. Vince12v

    Tyres

    I didn't rate the proxes, not much grip! Sent from my iPhone using Tapatalk
  6. Vince12v

    Tyres

    I looked at reveiws on uniroyals, an they wasn't great reveiws, I've run yoko parada spec2 I also thought they was great but I shredded them in Afew months! Wet weAther not great either! Sent from my iPhone using Tapatalk
  7. Vince12v

    Tyres

    Can anyone recommend some decent tyres for the golf, been runnin toyo t1r, but they're not as good as the once where, I looked At Michelin pilots Yokohama s-drives Verndesteins ultrac Falken z1ex Sent from my iPhone using Tapatalk
  8. Pmd u matt Sent from my iPhone using Tapatalk
  9. Will do Sent from my iPhone using Tapatalk
  10. Every time I ring them they tell me I need to be a buisness Sent from my iPhone using Tapatalk
  11. Where was that from Pete?? I'm told euro car parts do a decent one Sent from my iPhone using Tapatalk
  12. Genuine part?? I heard horror stories bout the price Sent from my iPhone using Tapatalk
  13. Hi chaps, I'm in the market to replace the coil pack on my obd2 vr, I have seen a lot of people use the ford set with some mods. Has anyone on here done so or have they just replaced like for like?? Sent from my iPhone using Tapatalk
  14. Hi chaps, Afew weeks bk I fitted some cams in the vr, and had some issues with the oil tensioner, eventually got it sorted but I have a horrible feeling the chains may have jumped a tooth on the lower pulley!! Is there any way of telling if the timing is out?? With out takin it all apRt Sent from my iPhone using Tapatalk
  15. I'll leave it as it is then, Sent from my iPhone using Tapatalk
  16. Naa I've blocked that off, so I don't actually need the 2nd pipe? I can just block the intake pipe and put a breather filter on the catch can Sent from my iPhone using Tapatalk
  17. So I need to block off the inlet, so where do I take the 2nd pipe from the catch can? At the moment I have a pipe comin from the rocker to the catch can and a pipe from the catch can to the intake pipe where the pcv would have gone in Sent from my iPhone using Tapatalk
  18. Nope Sent from my iPhone using Tapatalk
  19. Yea pretty much, I couldn't see anywhere else to take it too, my pcv split in 2 so couldn't refit it Sent from my iPhone using Tapatalk
  20. All I've done is remove the pcv and replaced it with the catch can, so it's only rocker cover case pressure Sent from my iPhone using Tapatalk
  21. That was what I thought, so I doubled checked the seal with abit of washing up juice Sent from my iPhone using Tapatalk
  22. I thought blue smoke was over fueling and black smoke was engine oil?? Sent from my iPhone using Tapatalk
  23. Evening chaps, after replacing the inlet, throttle and exhaust gaskets, I reassemble the manifold also removed my nackard pvc and fittin a catch tank, I have now got an annoying intermittent idle issue, seems too be abit harder to start too. It will idle ok but then it will start hunting, blip the throttle an it stops but I drive away come to a stop and it's there again!! Anyone got any ideas, I've recently changed the blue temp sensor too Sent from my iPhone using Tapatalk
  24. I thought they was 239mm?? Sent from my iPhone using Tapatalk
×
×
  • Create New...