[Coil packs]

I know that but can the loom be modified??

[Coil packs]

Is it possible to fit R32 coils pack to a VR6???

Has anybody ever done it???

[Mk3 Golf VR6, running lumpy, codes read 00522/00533/00553]

I would say it was the temp sensor.

[2.8 to 2.9]

Its a good deal then???

Why do I need the front cross member???

I was going to take the complete lump, injectors,manifolds, engine loom and ECU.

Its a coil pack 2.9 and I'm running OBDI c2.8 oil pack VR6 in a Caddy.

[2.8 to 2.9]

Just the answer I was looking for, Thanks.

I knew cams, bore and inlet manifold were different but not the others.

Its a real 2.9 and its still in the car waiting for me to buy it. Engine numbers match V5 and its never had an engine change. 114k on the clock. I can have it with the ECU for £150.

[2.8 to 2.9]

Air filter and manifold from what I'm told but all dyno's tell a very different story!!

I hope it is just a plug and play, for the ECU. Everything else should be ok, fingers crossed

[2.8 to 2.9]

AAA I have now is in my Caddy and is OBDI with coil pack and is on gas and is 188bhp.

I can have a ABV OBDI with coil pack with 204bhp and more torque.

It has a better in let and power and will be easier to get more power from. It would be nice to be different and have a 2.9.

How and where would the wiring be different??

Could I get the AAA ECU remapped for a 2,9 remap??

[Ran out on fuel, and now won't start]

Blocked fuel filter.

Can you hear the pump prime??

[2.8 to 2.9]

Rado is OBDI so I would just need the ECU as well??

Would Rado ECU work with Golf wiring??

[2.8 to 2.9]

Why the blocks??

Can't I just change the engines complete??

Is the fuelling the same??

[2.8 to 2.9]

Can it been done with ease???

I have been offered a 2.9 cheap and would love it in my Caddy which is 2.8 OBDI

Possible??

[HT lead/Spark plug tool]

There is a chap on vw caddy forum sell these tool for £10 inc P&P

Here is a link....................... http://www.vwcaddy.com/showthread.php?p=633717#post633717

[HT lead/Spark plug tool]

I went a got a tool from here..................................

http://www.epictools.co.uk/

It was only £12 for a Sealey too!!!

[HT lead/Spark plug tool]

Has anybody made 1 or know how to???

I really don't want to pay out £20, I'm a scrooge!!

I tried yesterday with long nose pliers and a screw driver to push the leads on with no joy.

[Arcing HT leads.]

They are new leads and they have "Clicked" into place as if they are connected properly.

[Arcing HT leads.]

I have bought and fitted some new magnecor 10mm HT leads. I started it up and it started missing straight away. I looked down at each lead in the head and could see that each lead is arcing out.

What would cause this???

[Mystery front suspension (?) noise]

Sounds to me like the rear engine mount.

[VR6OC 2013 Calendar]

As above...........

[ECU Part numbers]

Many thanks for that.

So how can I found out what ECU part no. the car needs??

[Owners Register - Add your car now!]

I've added 1 only 3 more to do!!

[ECU Part numbers]

Anybody????

I have a car with part no. ending 258A and 1 ending 258BK

[Fuel pump wiring]

Many Thanks.

There seems to be no live that the fuse or relay???

Anybody had this???

[Fuel pump wiring]

Nobody??

[Estates]

I have a Audi A4 B8 Avant with loads of extra's and Love it. Remapped to 245bhp and it still does 50mpg easy.

I will be buying another next year for sure.

[Fuel pump wiring]

Help Please.

I am getting no power to my fuel pump.

I have checked the relay, had 2 from other cars that are known to be ok, and its fine, so too is the fuse. The engine start's and run's ok with easy start. Tested the fuel pump with a live and it pumps. I am get a live for the fuel gauge and that works fine.

Any idea's???