Jump to content

cpfcvr6

Members
 View Profile  See their activity

  • Content Count

    106

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by cpfcvr6

  1. cpfcvr6
    is vortech like the v9 charger etc....?
  2. cpfcvr6
    is vortech the best make out there?
  3. cpfcvr6
    what number fuse it is bud?? also switch you mean the switch you use to open and close it?
  4. cpfcvr6
    my sunroof was working then stopped in the golf mk3, ive since tried 3 motors and no luck. any ideas where to look next? fuse box? if so what fuse or relay is it?
  5. cpfcvr6
    anyone im doing it now?
  6. cpfcvr6
    hi guys , is the racelands 6 branch the same size as the golf vr6 original downpipe?? i mean its not longer where it meets the CAT so you dont have to chop a bit off the end of the CAT etc??
  7. cpfcvr6
    did you want to sell it?
  8. cpfcvr6
    ok i guess there rubbish then!
  9. cpfcvr6
    anyone tried one?
  10. cpfcvr6
    funds are tight at the moment, i have seen these on ebay, are these a good fitment on the golf vr6 or not chaps?? see link below - http://www.ebay.co.uk/itm/VW-VOLKSWAGEN-GOLF-MK3-8V-16V-VR6-GTI-710mm-LONG-SILENCED-DECAT-PIPE-EXHAUST-/220880839234?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item336d862242 thanks in advance :-)
  11. cpfcvr6
    will a raceland exhuast 6 branch manifold fit onto my milltek decat pipe ok which is already on the car? thanks in advance.
  12. cpfcvr6
    update ive chaged the idle control valve back to me old one and its stopped kangarooing when it used to?? can the idle control valve cause this?
  13. cpfcvr6
    again all new mate :-(
  14. cpfcvr6
    brand new buddy!
  15. cpfcvr6
    ??
  16. cpfcvr6
    golf vr6 has a missfire every now and then, can be very jumpy (kangaroos) in 1st and 2nd gear sometimes. it only does it every now and then, can will drive fine most of the time and im getting 26.06 MPG varied driving! its running dizzy and i have had brand new - sparks, leads, dizzy, rotor arm, air filter. checked the sparks and leads today and all looked fine, removed leads with the right tool etc... cleaned the MAF. any ideas what it can be as im a bit stuck????
  17. cpfcvr6
    cool where exactly is this screw located and what direction do i turn it and how many 1/4 turns?? i dont want to be messing with the wrong screw :-)
  18. cpfcvr6
  19. cpfcvr6
    maf is fine, when i unplug it the car still runs fine?? weird how swapping the idle valve and it does the opposite!
  20. cpfcvr6
    hi guys, when my cars engine was at full temperature it used to idle really badly between 300-700RPM, sometimes cutting out. so i bought a brand new idle control valve, when engine is at full temperature it idles beutiful! but now from cold the car idles really bad between 300-700RPM for the first minute or so, sometimes cutting out. so its done the total opposite when i have put a new idle control valve on! weird isnt it but any ideas what the problem is??? cars had new sparks, leads, dizzy, rotor arm and fuel filter.
  21. cpfcvr6
    cool, i thought if the diff is suspect the speedo would go up all jumpy? car isnt with me but going to check the rotational direction on the tyres if there wrong way around!!
  22. cpfcvr6
    tracking has been done, what are ditch finders tony?
  23. cpfcvr6
    hi guys had BOTH the front wheel bearings done on the golf vr6, the bad humming has gone on the left hand side but i still get a humming sound from the front, any ideas whats up still? :-)
  24. cpfcvr6
    gsf mate
  25. cpfcvr6
    for golf vr6 front wheel bearings both sides 4x rubber boots for driveshafts drivers side ball joint on the end of the wishbone £98 thats sounds a bit steep???? does that sound right????
×
×
  • Create New...