Jump to content

tasja

Members
 View Profile  See their activity

  • Content Count

    19

  • Joined

  • Last visited

 Content Type 

Everything posted by tasja

  1. tasja
    hi there I am from South Africa, I will be going to Germany(munich). Does anyone no what chips, turbos and remapping software to buy and where I can find them and the cost in EUROS. Can I remap my ecu with a vagcom or do i need special software to boost my perfomance. ANY HELP WILL BE GREATLY APPRECIATED.
  2. tasja
    hi there could anyone please help me with this problem. When I put gas it starts to sputter and then back fires. I think that it is overfuellling cause I can smell the fuel. There are no fault codes coming up.!sadPLEASE HELP
  3. tasja
    hi there i am from South Africa i have read alot about the garret chip i was wondering if there is anywhere on the net i can buy this chip from thanx
  4. tasja
    thanx for the replies i am glad to see that all you'll vr's are economical. could i get some tips on how to make my one economical
  5. tasja
    hi there i donot know if this is normal or not but on a fuel tank i get about 300km if this not normal could any one give me ideas on how to correct this. many thanx
  6. tasja
    hi there i got a few problems. firstly the idle fluctuates and the car dies it has to be restarted. secondly when i put foot it takes a while to accelerate thirdly when a accelerate there is a squikking sound can anyone please help me with these problems any help would be appretiated. many thanxs !sad
  7. tasja
    hi there please could anyone help me with an idea to modify my standards headlight or where i can find a link please i want to leave them standard. many thanks
  8. tasja
    i have a 96 mk3 vr6 with original rims
  9. tasja
    hi there could anyonme give give me a step by step guide on how to go about polishing these rims with out removing the tyre. any help will be greatly appreciated many thanks
  10. tasja
    hi there i found the leak it was not the platic pipe from the thermostat to the water pump. it was a plastic part behind the plastic pipe. i put heat resistant silcone in the hole and the leak stopped. i am going to go to the dealer to find out what is the name of that plastic part. thanks for all the help tasja
  11. tasja
    hi there could any one gelp me with a step by step guide on how and what to polish and the polish to use. could any show me photos of parts that have beeen polished i think she needs a new look many thanks
  12. tasja
    hi there i do not think that it is the thermostat housing cause i have just replaced about a month ago. it may be the long black pipe from the housing to the water pump. if it is how do i remove it. thanx
  13. tasja
    i have a water leak just above my oil cooler i looks like plastic,c ould anyone please tell what that part is called. many thanks
  14. tasja
    i have a 96 mk3 vr6 i have some loose wires lyling around and i donot know where they go. could any help me with a wiring diagram please or where i can fing one. many thanks
  15. tasja
    i had a coolant leak it was coming from the oil cooler the oring had broke off i replaced the oring and there was no more leak i hope this helps some one
  16. tasja
    many thanks i will try carb cleaner and let you'll know if it works
  17. tasja
    hi there could anyone give me information on how to clean and idle control valve and the steps in cleaning and what to use to clean it many thanks tasja
  18. tasja
    hi there i found what my problem was with the misfire. the idiot of a mechaninc when assembling my engine put my pistons in the wrong way(the hump was on the intake side) and the head gasket was blown. when i come to a robot the car does not want to idle it cuts off and sometimes it does not. please help
  19. tasja
    my car sounds like it is running of 4 cylinders instead of 6 think it is my injectors. i have done almost everything else from changing plug leads to buying a new coil pack even chaning the afm. please help
×
×
  • Create New...