mike 6 Posted June 24, 2006 Report Share Posted June 24, 2006 My last vr had full closure, this ones a highline and it doesnt work on it with the remote. it may have done with the key but i just de-locked the handels so cant do that.i have a TOAD AI 606 fitted and i think thats the reason it wont work by remote? am i right.cheers Link to post Share on other sites
tinny22 11 Posted June 24, 2006 Report Share Posted June 24, 2006 my vr has a TOAD AI606 and my full closure doesnt work but i got probs with my rear windows but the book i got with the toad said you can have full closuremy other vr was a highline had the same toad ai606 and did work if you are going to tatton park i can bring the manualtinny22 Link to post Share on other sites
mike 6 Posted June 25, 2006 Author Report Share Posted June 25, 2006 i also have a boot soloanoid i need to fit, need to know if my alarm can control it? Link to post Share on other sites
katconcarne 0 Posted June 27, 2006 Report Share Posted June 27, 2006 I had the same Toad alarm and had a boot solanoid working from it. A proper auto electrician should be able to wire up all the functions on the alarm for you such as, having your lights turn on at the push of one of the spare buttons.When mine was in for the fitting,the guy said that he has problems all the time fitting full closure alarms to gtis and vrs because of the pneumatic vw closure system.Mine turned out to be a problem with that system, not the alarm. I changed the control unit in the boot and it works fine now. Good luck,(@) Link to post Share on other sites
mike 6 Posted June 27, 2006 Author Report Share Posted June 27, 2006 cool how does the solanoid work from it, do you use a spare button? iv read you can get your engine to start from this alarm for £100kit sounds cool Link to post Share on other sites
dubberVR6 0 Posted June 29, 2006 Report Share Posted June 29, 2006 My Highline has a Toad alarm and the full closure works fine, although the sunroof sometimes stays open, which is a little annoying! Link to post Share on other sites
ian 182 0 Posted July 2, 2006 Report Share Posted July 2, 2006 Mine works fine on my toad ai606.Sunroof tooian Link to post Share on other sites
antera309 3 Posted July 4, 2006 Report Share Posted July 4, 2006 For a toad system with total closure, you should have a 4-button remote. Hold down button 4 for 3 seconds after locking to activate the closure. If that doesn't work, try holding buttons 3 and 4 down simultaneously for 3 seconds. Link to post Share on other sites
Recommended Posts