regs 0 Posted June 7, 2006 Report Share Posted June 7, 2006 hi just need some help in taking my passenger side door card off as my E/W only goes down about 3"s and then makes a grinding noise so i think it might have come off the runners any help much apprieciated oh by the way the cars a Highline with the leather door cards not sure if this makes any differance Link to post Share on other sites
Petesvw 0 Posted June 7, 2006 Report Share Posted June 7, 2006 Two screws under the inner door handle (remove the outer bit) remove inner door pin, then the rest of it is just cliped on! Link to post Share on other sites
regs 0 Posted June 7, 2006 Author Report Share Posted June 7, 2006 thanks got the cards off no probs cant figure out whats wrong with the window though managed to get get to go down but makes a horrible scraping sound any ideas Link to post Share on other sites
Petesvw 0 Posted June 7, 2006 Report Share Posted June 7, 2006 ? Hmm, best bet AFAIC would be to remove the mech. entirely to see if you have any fraid wires!Once you have it out, hoping there is no broken bits, would be to ensure it's well greased, then pop it back in fingers crossed!Could just be a dry bit that needs lube! Link to post Share on other sites
Recommended Posts