starwing 0 Posted May 12, 2006 Report Share Posted May 12, 2006 been offered a jamex kit for 190, 280 fittedare they nay good, will they be ok with my 17salso lookin into g-max but dont think they do 50mm Link to post Share on other sites
spindat45 0 Posted May 13, 2006 Report Share Posted May 13, 2006 been offered a jamex kit for 190' date=' 280 fittedare they nay good, will they be ok with my 17salso lookin into g-max but dont think they do 50mm[/quote']G-Max kit is a non adjustable Spring/Shock set up. They sell it as a 35mm drop but its more like 40mm once its settled. You will probably need to roll your arches if you want to go lower depending on the offset of your rims. I'd have them done anyway. Don't know anything about the Jamex kit but if you do a search on here you might find a thread about it.Kevin Link to post Share on other sites
jb9999 0 Posted May 13, 2006 Report Share Posted May 13, 2006 I had Jamex damper and springs on one of my Audi sports and I wouldn't waste my money to be honest mate. Save up and get a decent suspension kit. They are cack, in fact,yicky yacky birds cacky. Link to post Share on other sites
petervr6 0 Posted May 13, 2006 Report Share Posted May 13, 2006 im down 60mm with tt comps had standard archs was ok no rubbing. Link to post Share on other sites
spindat45 0 Posted May 14, 2006 Report Share Posted May 14, 2006 im down 60mm with tt comps had standard archs was ok no rubbing. :S Link to post Share on other sites
spindat45 0 Posted May 14, 2006 Report Share Posted May 14, 2006 im down 60mm with tt comps had standard archs was ok no rubbing. :S Peter VR, Is it possible that there are different offsets for these rims as mine definately seem to sit further out in the arches (front and back) compared to the pics Ive seen of yours? Also do you have a lot of negative camber on the fronts? More than 1 degree maybe? :S Kevin Link to post Share on other sites
petervr6 0 Posted May 14, 2006 Report Share Posted May 14, 2006 infact my front archs are still stock aint been rolled coz i had new wings fitted as fror the camber could be sitting in a bit more than useually yes well spotted when i changed the suspension i never got the camber done but i had standard rims then as for the back the archs have been rolled and slightly pulled/excessivly rolled.lol if you like. Link to post Share on other sites
spindat45 0 Posted May 15, 2006 Report Share Posted May 15, 2006 Get that camber checked mate. You could be eating through the inner edges and decent tyres aint cheap. If you got a good tyre shop near you they can always swap the fronts over on the rim (directional) so you get more from them. Just keep an eye on the wear tho Kevin Link to post Share on other sites
petervr6 0 Posted May 16, 2006 Report Share Posted May 16, 2006 im in the trade so i dont pay me me tyres other wise i would def be on top of it thanks though mate Link to post Share on other sites
spindat45 0 Posted May 16, 2006 Report Share Posted May 16, 2006 im in the trade so i dont pay me me tyres other wise i would def be on top of it thanks though mate Link to post Share on other sites
Recommended Posts