iib3327 0 Posted April 26, 2006 Report Share Posted April 26, 2006 right i've been helping my mate put a VR6 into his 16v corrado using all the parts from a K reg mk3 vr6 with rear end damage...the engine ran fine in the mk3 but now its in the Raddo we have no spark.. we've traced what we can find and everything matches my mk2 vr6 (running)any ideas?have checked coil, leads, dizzy, ecu etc..any help would be a real big help to us.. Link to post Share on other sites
kilokilla 0 Posted April 26, 2006 Report Share Posted April 26, 2006 have you changed the relay in ecu and checked all the wires are plugged in correctly the main relay to check is the 3rd 1 along from left hand side top row should have the number 109 on it and have you connected the red and yellow wire with red plug is connected to ignition liveit should be on engine loom behind fuse box if you are really stuck and can get it to stoke on trent im sure i could get it running for you. Link to post Share on other sites
Recommended Posts