How to achieve this?

[MarkGolf 6]

Whats the best paint to use on my manifold to get the inside bits covered?

Then what grades are best to use to get the polished mirror finish??

Thanksssss

[binliner 0]

you can get high temp engine paints from Halfords.... to get a mirror finish you need to start with 40 or 80 grade sandpaper (or drill attachment if you're careful) to get rid of the texture then go to 120 grade wet n dry followed by 240, 400, 600, 800 then 1200/1500 to finish! use each grade until it has removed the scratches left behind by the last grade and use plenty of clean water with a bit of washing up liquid (a spray bottle is handy to keep it clean)... finish off polishing it with autosol.

Ive just bought a polishing kit to attach to a drill which take out a lot of the hard work... £45 from frosts

[MarkGolf 6]

Wanna do mine like that!

Cheers Justin, will give it a go!

[madmonkee 0]

to get the paint all over, best way electrostatic aplication then bake you will have to mask off the areas you dont want paint. Electrostatic will more or less get in everywhere!