richievr 1 Posted April 17, 2006 Report Share Posted April 17, 2006 i'm looking at some wheels, they are going to be 7.5x16 et30 if anyone has this size do you have any pics???how far out do they come??what size tyres do you run??205/40/16? 195/40/16 195/45/16 ???????my arches are rolled at the back but not at the front and it runs this low : - thanks peeps...... Link to post Share on other sites
Slim 0 Posted April 17, 2006 Report Share Posted April 17, 2006 No pics, but you'll have no problems whatsoever with arch clearance so I wouldn't worry. Link to post Share on other sites
stockers 1 Posted April 17, 2006 Report Share Posted April 17, 2006 hi rich,et of 30, the rim will sit on the edge of the arch at the front and slightly in on the rear,mine are 7" wide with an et of 35 an d they rub but i have a 70mm drop, yours looks a little higher so you proberbly won't have any problems. Link to post Share on other sites
richievr 1 Posted April 17, 2006 Author Report Share Posted April 17, 2006 cheers guysadam - i had 7x17 as my last wheels... they rubbed ever so slightly too but only on the front on hard cornering..i'm thinking 16's are that little bit smaller so hopefully wont.......anybody??? Link to post Share on other sites
Slim 0 Posted April 17, 2006 Report Share Posted April 17, 2006 Well I've got 7.5"x17" wheels on an ET21 offset with the coilovers wound down pretty low and I don't get any scrubbing, although I have 195 width tyres. Link to post Share on other sites
richievr 1 Posted April 17, 2006 Author Report Share Posted April 17, 2006 your et21 don't rub...nice..undecided whether to go 195/40/16 or 205/40/16...could be 195's then, but don't really want to go narrower than std 205 width..but that's good news - cheers slim.. p.s. your motor looks TIDY.. Link to post Share on other sites
The1andonlygav 0 Posted April 19, 2006 Report Share Posted April 19, 2006 195's mate, you know it makes sense Link to post Share on other sites
Recommended Posts