VAG.com fault codes

[francisjonno 2]

I've just plug my car into vag.com and come up with the following fault codes,

"Address 01: Engine

Controller: 021 906 256

Component: MOTRONIC M3.8.1 HS V02

Coding: 00000

Shop #: WSC 01317

2 Faults Found:

00668 - Supply Voltage Terminal 30

07-10 - Signal too Low - Intermittent

00533 - Shareware Version. To Decode all DTCs

14-10 - Please Register/Activate - Intermittent

Readiness: N/A

-------------------------------------------------------------------------------

Address 03: ABS Brakes

Controller: 3A0 907 379 E

Component: ABS/EDS ITTAE 20 GI V00

Coding: 03704

Shop #: WSC 00000

1 Fault Found:

01276 - ABS Hydraulic Pump (V64)

16-10 - Signal Outside Specifications - Intermittent"

does anyone know what they mean other than the basic info the software gives?

Any advice would be appreciated

Jonno

[ni-golf 0]

i have the second fault (althou without intermittant) and my ABS light is on...new ABS pump goin in soon.. found a good condition one cheap as a new one was 900 quid.

[jellsta 0]

where is your vag com? port i can not find mine on my 1994

have u tried look on vag coms web site for the codes?

[vr6turbo 27]

check the fuse under the dash for the abs system i had the same fault and went to the dealership to ask a prive for a new abs unit and nearly passed out when the said 4 figures

they kindly gave me some copies of the abs wiring diagram

so off to work i went with my leccy tester

in my case it was worth having a look

hope this helps

[francisjonno 2]

Jellsta - try here to find where your port is

http://en.openobd.org/locations.htm#vw_sharan_7m

vr6turbo - Thanks for the advice, definitely going to check/change the fuse first.

How do you reset the fault? (or does it do it automatically?) - I haven't had a good look round the vag com software yet