jellsta 0 Posted November 9, 2005 Report Share Posted November 9, 2005 Can any one tell me where the vag com port is on my 94 vr6, someone told me it was by the ashtray but i can nott see it there cheers !shy Link to post Share on other sites
Justicevr6 0 Posted November 9, 2005 Report Share Posted November 9, 2005 Try herehttp://en.openobd.org/locations.htm#vw_sharan_7m. Link to post Share on other sites
MrBen 0 Posted November 9, 2005 Report Share Posted November 9, 2005 Remove ashtray and slide the little panel to the left out (above cigarette lighter) Link to post Share on other sites
jayvwvr6 0 Posted November 10, 2005 Report Share Posted November 10, 2005 mr ben,jellsta has an early vr6 they have no sliding plate,this is the same as my mates early vr6,dont no were it is on pre 95 models mate. Link to post Share on other sites
VRVIRGIN 0 Posted November 13, 2005 Report Share Posted November 13, 2005 I'm trying to download VAG- COM from the internet but there seems to be different versions. Anyone know if v0.80 is the right version? And is the vag com connection cable available in computer hardware stores or is it VW only? Link to post Share on other sites
Justicevr6 0 Posted November 13, 2005 Report Share Posted November 13, 2005 Ross Tech is the best place to download the software in my opinion the software you need is 3.12 or 4.08 if you buy a dongle cable then there is a newer version of Vag Com you can down load.The cable itself is not some thing you will get from a shop you will need to buy from ebay or from a Vag com dealer, Ross Tech http://www.ross-tech.com/index.html or Skpang http://www.skpang.co.uk/catalog/product_info.php?cPath=41&products_id=83&osCsid=634622125ed845efe2a825649dd92fa0 this is in the UK, On ebay you can get a cable for about Link to post Share on other sites
Recommended Posts