fritzenberg 3 Posted October 15, 2005 Report Share Posted October 15, 2005 got som ngk bkr5ekup`s,says on the box "adjust spark plug gap to engine makers spec",how do u do this and what is the spec?also what kind of ratchet and bar do i need and where can i get these? Link to post Share on other sites
FishWick 21 Posted October 15, 2005 Report Share Posted October 15, 2005 You don't need to gap those plugs, they're preset. I think they're set to 0.8, which is right.12mm rings a bell for the plug socket. Link to post Share on other sites
craggsy 91 Posted October 15, 2005 Report Share Posted October 15, 2005 Can't remember size of plug but when I got my new ones i measured em then went Halfords and measured the internal measurment and bought one that way Link to post Share on other sites
uber-tub 0 Posted October 16, 2005 Report Share Posted October 16, 2005 be careful when removing the HT leads. If you don't have the correct tool try to get some very long nosed pliers right down to the metal case at the bottom of the lead... don't ever pull on the lead from the top, it will just pull apart and a a tenner a pop this soon gets tiresome. Link to post Share on other sites
FishWick 21 Posted October 17, 2005 Report Share Posted October 17, 2005 Oh and the plug socket you need is 10mm, not 12 as previously stated. Link to post Share on other sites
Recommended Posts