Brianvr 0 Posted September 11, 2005 Report Share Posted September 11, 2005 hi all looking to fit some decent wheel spacers topush out my bbs rs allys as they dont fill arches well enough the offset is et42 205/45/16 any advice on what is best size without rubbing arches.cheers.brian. Link to post Share on other sites
MrBen 0 Posted September 11, 2005 Report Share Posted September 11, 2005 Nooo, that was my idea!! I've reckoned on 20mm - have bought the spacers (from another member on here, don't know where he got them), just need to finish polishing up the BBS and I'll find out! Link to post Share on other sites
MSV83 0 Posted September 11, 2005 Report Share Posted September 11, 2005 try tunning werkes.....lets have a look at the rims then!! Link to post Share on other sites
Brianvr 0 Posted September 29, 2005 Author Report Share Posted September 29, 2005 WHAT SORT OF PRICE SHOULD IS GOOD. Link to post Share on other sites
Brianvr 0 Posted November 8, 2005 Author Report Share Posted November 8, 2005 were to get spacers ,anyone used spacers from eurotek about Link to post Share on other sites
stuey 0 Posted November 8, 2005 Report Share Posted November 8, 2005 Hi, check if the spacers you want add mm's per axle or per side. Also i was told to check what type of wheel bolts you have, taper or cup. I tried Eurotek and Gwent VW, waiting for some spare cash!! You will also need longer locking nuts if you fit them too! Link to post Share on other sites
mattverth 0 Posted November 9, 2005 Report Share Posted November 9, 2005 http://www.ecstuning.com/HR/ Link to post Share on other sites
aad 0 Posted November 9, 2005 Report Share Posted November 9, 2005 mattverth i like them alot but my car is so low at thefront my passenger side arch is coming down under archdue to catching my tyre i had to knock it up the other daythought wing was going to come off.would having my archesrolled cure this and were could i get it done i,m in nottm.many thanks. Link to post Share on other sites
mattverth 0 Posted November 13, 2005 Report Share Posted November 13, 2005 Bite the bullet mate, raise it!As for arch rolling in Nottingham? Don't know, but I know of two places in Sydney! Link to post Share on other sites
Brianvr 0 Posted December 5, 2005 Author Report Share Posted December 5, 2005 with et 42 what sizes is max without rubbing arches.i have 16" 7.5 bbs rs2 fitted with 205/45/16 tyres.may go with 10mm front -15-16mm rear.any ideas people. Link to post Share on other sites
Recommended Posts