Pittuf 0 Posted August 27, 2005 Report Share Posted August 27, 2005 How do I remove the backs.....the flippy down bits Probably really simple but run out of time today to look at it properly.....looks like there is an allen key screw at each end, but it looked abit tight to get one in, didn't try, didn't have time.Cheers Link to post Share on other sites
pete8tch 0 Posted August 27, 2005 Report Share Posted August 27, 2005 just rotate the clips on the door ends and they slip out from the middle jon. dead easy mate well it is on a 5 door , get a flat bladed screw driver and just push the clips up.peyte Link to post Share on other sites
DundeeDub 0 Posted August 28, 2005 Report Share Posted August 28, 2005 also remove the 4 bolts at the bottom of the split in the seat. comes out real easy then Link to post Share on other sites
Pittuf 0 Posted August 28, 2005 Author Report Share Posted August 28, 2005 I removed the 4 screws in the middle but couldn't get em out, will give it another go in a min....cheers guys Link to post Share on other sites
pete8tch 0 Posted August 28, 2005 Report Share Posted August 28, 2005 u dont need to undo the screws if u want em out u need to pull out the clips from the boot they go over a pin , just remembered mines got mk 4 seats in so its easy ... just look at the bracket from the back and u will see em Link to post Share on other sites
Pittuf 0 Posted August 28, 2005 Author Report Share Posted August 28, 2005 Sorted, just flipped the tag at the sides. whicvh let the positioning rod come out.I needed to reroute a couple of cables along the floor where they made such a poor job of fitting my alarm and putting the car back together Link to post Share on other sites
Recommended Posts