MarkGolf 6 Posted April 4, 2004 Report Share Posted April 4, 2004 I have my VR6 rear beam all built up and ready to go onCan you fit rear sway bars to them? I can see there is one in the beam, but its welded in.... how can one be fit if possible?Thanks Link to post Share on other sites
VR6Steve 0 Posted April 4, 2004 Report Share Posted April 4, 2004 My car has Eibach ARB's fitted. The front one though has been touching on the exhast downpipe where the car has been lowered. Seems ok now that a small dent has appeared in the down pipe that the arb slots nicely into. :-) Link to post Share on other sites
FishWick 21 Posted April 4, 2004 Report Share Posted April 4, 2004 Yeah aftermarket sway bars anchor to the rear damper bolts and also the beam using the supplied "wrap around" brackets.If you can be bothered to maintain the rose joints on Neuspeed bars, they're very very good. Otherwise Eibach, which are also very good. Link to post Share on other sites
MarkGolf 6 Posted April 4, 2004 Author Report Share Posted April 4, 2004 Nice, will have to keep an eye on some at Inters! Thanks! Link to post Share on other sites
Recommended Posts