Cooz93 66 Posted July 12, 2014 Report Share Posted July 12, 2014 Just done a 312mm conversion on my early VR and struggling to find the banjo bolts for the new brake hoses. Tried eBay but didn't come up with any. Does anyone have some kicking around or know where I could get? Cheers Link to post Share on other sites
Lukey. 381 Posted July 12, 2014 Report Share Posted July 12, 2014 HEL or Goodridge Link to post Share on other sites
Cooz93 66 Posted July 12, 2014 Author Report Share Posted July 12, 2014 Confused to which kit I should get as I've done the conversion.. The only kits I can find that come with a suitable banjo bolt are the braided lines for the rear brakes. Looking on eBay, awesome gti, vw spares etc and can't find something. Or maybe I'm just being daft!? Link to post Share on other sites
Cooz93 66 Posted July 12, 2014 Author Report Share Posted July 12, 2014 (edited) http://www.ebay.co.uk/itm/231141651930This would do ye? Edited July 12, 2014 by Cooz93 Link to post Share on other sites
Lukey. 381 Posted July 13, 2014 Report Share Posted July 13, 2014 That's for the whole hoses kit not the banjo bolts only, if you're lookin for full HEL hoses, which you should as they are awesome, then you need the 6 hose kit for a late VR6, they have banjo fronts. Link to post Share on other sites
CALICO 130 Posted July 13, 2014 Report Share Posted July 13, 2014 (edited) I think its just the bolts that he needs! Am I right? as I have a spare couple just removed from my 288 I would have thought they would be cheap enough to get from Vw or TPS maybe even a motor factors Edited July 13, 2014 by CALICO Link to post Share on other sites
Cooz93 66 Posted July 13, 2014 Author Report Share Posted July 13, 2014 Ye mate, it was just the bolts I need. But I've decided that funds are allowing me to get the braided hoses just now. Got a set on eBay and emailed the guy to make sure the bolts come with the hoses:) up here in aberdeen there is a serious lack of places to get parts. Halfords are rubbish and the other places there is aren't up to much either:(Cheers for the help guys! Link to post Share on other sites
Lukey. 381 Posted July 13, 2014 Report Share Posted July 13, 2014 They come with bolts, you have to make sure you don't over tighten them they only require a low torque like 12Nm Link to post Share on other sites
Recommended Posts