abvsean 32 Posted April 14, 2014 Report Share Posted April 14, 2014 I have a vr6 in my mk2 golf and i have the two pump digifant set up for the fueling I have just went to start the car after having it all in pieces and wondered if theres a certain way to rebleed the system,I was under the assumption that it would pressurise the system itself and all i would need to do would be let the air out of the fuel rail using the bleed screw at the end But... all im getting is sound from the pump for 2 seconds then nothing,no fuel at the rail or pipes. I have had the pump off the car,new fuel filter and new lines any help would be appriciated Link to post Share on other sites
Lukey. 381 Posted April 15, 2014 Report Share Posted April 15, 2014 I never even did that, just connected it all back up and cranked it till the fuel made it's way right down the lines again and it fired. Link to post Share on other sites
abvsean 32 Posted April 15, 2014 Author Report Share Posted April 15, 2014 yeah thought id might,ill strip it down and start investigating tonight after work,thought i might have been missing a trick cheers Link to post Share on other sites
Recommended Posts