khare 12 Posted March 11, 2014 Report Share Posted March 11, 2014 As title, I've forgotten to measure the diameter of both the maf and the bmc outlet so I could order a silicone hose to join them. Anyone have the measurements I need to hand? Link to post Share on other sites
jamesw6810 80 Posted March 11, 2014 Report Share Posted March 11, 2014 (edited) OD is 3" 76mmID is 2.75" bmc inlet and outlet is 3.34" or 85mm so 85 to 76mm reducing connector you need or near as damn it Edited March 11, 2014 by jamesw6810 VR6Pete 1 Link to post Share on other sites
khare 12 Posted March 11, 2014 Author Report Share Posted March 11, 2014 Legend. Thanks very much James! Link to post Share on other sites
khare 12 Posted March 13, 2014 Author Report Share Posted March 13, 2014 Received it today and fitted it. Bought a 76mm to 88mm as I didn't find an 85mm one. The MAF side fitted perfectly, but it was too big on the BMC outlet, so I've had to take a knife to it and cut it closer to the 76mm opening. It's about half the length now but it fits perfectly. Cheers James for the measurements! Link to post Share on other sites
Recommended Posts