Ballin 0 Posted January 1, 2014 Report Share Posted January 1, 2014 (edited) Here is my 1996 GTI engineering VR6 (plus PAC) in black magic that I recently picked up and will use for the business;Engine wise it has GTI engineering 2.8 OBD2 VR6270 camsBMC IntakeDecat with 6 Branch manifoldRemap to suit modsBreathers and vacuum pipe deletePlans for the motor are to;Delete ACTidy the loom/bayPolished intakesRenew bottles and capsUpgrade coil packs (any ideas?)Maybe forced induction next yearWheels & SuspensionWheels are TH-2's 178017x8 5x98 with proper wobble bolts5mm hub centric spacers at the rearCentre caps are like rocking horse poo! LOLSuper sport coiloversEibach rear camber shimsWeitech anti roll bars all round2.5 neg camber @ front1.5 neg camber @ rearFlat toe at the rear 1mm at frontPlans are to refurb the rims to grey (anthracite) or carbon dip them- suspension will be kept the same.BrakesBrembo discs all roundPagid RS4-4 oranges padsInteriorCurrently colour concept blue black heated leather with single 4 point sparco harnessHighline black trimCloth door cardsCorrado leather small steering wheelPlans for interior are;Polished half cageMulberry heated leather plus door cardsDynamat everywhereNice quality sound system that looks factoryMomo wheelCup holderHighline centre console & gear knobExteriorFront air ductsQuick release front bumperMorrette twin headlightsPlans for outside;Paint wings, bonnet, smooth & paint front bumperSmooth de wiper tailgate- look for a US bootTreat tiny rust on rear archesThink about a different headlight solution.....Polish polish polish......Put private plate on it and get some show platesLook forward to show season Edited January 1, 2014 by Ballin Link to post Share on other sites
Lozi 22 Posted January 1, 2014 Report Share Posted January 1, 2014 Pics? Link to post Share on other sites
Recommended Posts