djiceman 131 Posted October 7, 2013 Report Share Posted October 7, 2013 WhileI had my car up in the air yesterday I decided I was going to install some new indicator and fog lenses as the ones that were on the car were an absolute mess and I knew the fogs weren't working when I bought it.... So I unclipped all 4 of them (fogs and indicators) and to my surprise, the cabling is absolutely shocking, someone in all their wisdom decided to cut all the cables and rewire the indicators (not sure what they are off but they aren't standard) and haven't even bothered with the fog lights, just cut the ends off... What I would like to know is.... Is it possible to buy the plug that goes on the end of the wires and get an auto electrician to solder them back on or should I buy a whole new wiring loom? Where would I buy the plug that goes into the inidicators and fogs? Link to post Share on other sites
Lukey. 381 Posted October 7, 2013 Report Share Posted October 7, 2013 Go to a scrap yard, cut the plugs off with a few inches of cable left an just solder them on yourself, its super easy, solder them together then heat shrink the join. Link to post Share on other sites
Recommended Posts