ssaunders 199 Posted August 5, 2013 Report Share Posted August 5, 2013 Hi Guys, am after suggestions as to shocks for the above spring kit, its 30-35mm lower than standard. can i keep the standard? i need to swap one as its leaking on the front do i go for uprated? and which ones?also i am getting the clunk (in reverse) and will get the topmounts done as well while its all off is there anything else that should be done?cheers for the replies.Steve Link to post Share on other sites
ssaunders 199 Posted August 6, 2013 Author Report Share Posted August 6, 2013 Hi All, apparently the springs are designed for standard shocks so all good.my next question is is there a Bilstein B4 that will fit the VR? according to Bilstein website the answer is no they start at B6!do/has anyone run B4's on the VR? if so which ones the GTI or the TDI ones?cheerssteve Link to post Share on other sites
Therusterman 59 Posted August 6, 2013 Report Share Posted August 6, 2013 I'm running B4's with the same springs, can't remember the part number off the top of my head, but should be able to find the correct ones on eBay Link to post Share on other sites
ssaunders 199 Posted August 6, 2013 Author Report Share Posted August 6, 2013 ok thanks therust, i have looked at the AVS spares site and they list the same part for both GTI and VR6 (oem sachs) so i will get the GTI ones.thanks againsteve Link to post Share on other sites
Recommended Posts