Seademon 0 Posted April 12, 2005 Report Share Posted April 12, 2005 Hi guys - Im in the process of removing the carbon canistor from my car to route a cold air pipe to the air filter & I assume I have to take the front bumper off to get to it?Hows that done? I can see the 3 bolts in the middle under the grill - where else is it attached? Is it a quick job?Cheers! Link to post Share on other sites
binliner 0 Posted April 12, 2005 Report Share Posted April 12, 2005 It is easier to do with the bumper off. It's pretty easy to get off... disconnect the fogs/indicators, take the grill off, undo the 3 bolts, pop the 2 clips on each side that hold the arch liners to the bumper by pushing the centre bits out (which you will lose!) and then there are 5 bolts underneath the bumper (just above the lower grilles... then you can slide the bumper forwards and off Link to post Share on other sites
Seademon 0 Posted April 12, 2005 Author Report Share Posted April 12, 2005 Excellent cheers Justin! Link to post Share on other sites
Icy 0 Posted April 13, 2005 Report Share Posted April 13, 2005 what about removing rear bumper? Link to post Share on other sites
Recommended Posts