VIW28 29 Posted August 11, 2012 Report Share Posted August 11, 2012 Bar using a press I can't seem to refit the big washer things that press onto the upper side of the front crossmember for my after fitting polybushes Have tried various different methods involving the vice and nut and bolt combo with different washers and plates etc. Last thing to try is a press if that's what it takes, either that or try fit it to the car but they still need compressed somehow to get the bolt started.Anyone any advice? Link to post Share on other sites
Lukey. 381 Posted August 11, 2012 Report Share Posted August 11, 2012 Here's how I did mine, with no more than a jack and the front wheels driven onto blockshttp://www.vr6oc.com/e107_plugins/forum/forum_viewtopic.php?344740.90#post_474111 Link to post Share on other sites
VIW28 29 Posted August 12, 2012 Author Report Share Posted August 12, 2012 Yeah I see what you did there ok but why did you cut the washers off in the first place? I woud prefer to retain the original ones as they snap back on and stay there. Link to post Share on other sites
Lukey. 381 Posted August 12, 2012 Report Share Posted August 12, 2012 They wouldn't budge they were pressed on so tight Link to post Share on other sites
Recommended Posts