Andi 0 Posted February 26, 2012 Report Share Posted February 26, 2012 Scaned my car today to check its health and got the following.Do you think my Oxygen sensor is buggered and needing replaced ?Here is the scan.......................VCDS Version: Release 11.11.2 (x64)Data version: 20120126Sunday,26,February,2012,16:15:32:59382Chassis Type: 1H - VW Golf/Vento IIIScan: 01 02 03 08 12 15 25 41 56-------------------------------------------------------------------------------Address 01: Engine Labels: 021-906-256.lbl Part No: 021 906 256 Component: MARC VR6 SC 295BHP Coding: 00000 Shop #: WSC 01317 VCID: CFA303AA0DC68DB3 Faults Found:32767 - Unknown Error Code Unknown - 35-00 - 00525 - Oxygen (Lambda) Sensor (G39) 29-00 - Short to Ground00543 - Maximum Engine Speed Exceeded -- Engine Warranty VOID! ;-) 06-10 - Signal too High - IntermittentReadiness: N/A Link to post Share on other sites
v6horse 1 Posted February 26, 2012 Report Share Posted February 26, 2012 I Had that lambda fault once . and i believe i had to change it and it was gone .. but not 100% sure it was that code . and what is the Max engine speed exceeded ? i havent seen that one befor on mine anyways and i have had most lol Link to post Share on other sites
Andi 0 Posted February 27, 2012 Author Report Share Posted February 27, 2012 Quite impressive that one isn't it Lol. I think the limiter has been raised due to the supercharger making max boost at the top of the revs. Hence the over rev.The oxygen sensor is only 4/5 months old, so I'm a bit confusd as to weather It's broke. And am reluctant to change it. Link to post Share on other sites
VR6Pete 1,455 Posted February 27, 2012 Report Share Posted February 27, 2012 Pretty sure you there's a measuring block to monitor lambda... im sure the VCDS gurus will know Link to post Share on other sites
Recommended Posts