paul-gti 0 Posted February 19, 2012 Report Share Posted February 19, 2012 afternoon people, i have just built myself a VR6 polo saloon and the story so far.....bought the donor car which had been sat for 2 years, to our surprise it started 1st time, on wed i started the conversion, everything is in including VR speedo and trip comp stalk/vr wiper stalk (just because i could lol). i know in a lot of conversions the immobiliser looses its 12v feed (black wire from fuse box to immob) but gains it back when headlights are turned on, the engine cranks over, there is plenty of fuel getting to the engine it just wont fire into life.think its something simple that ive overlooked, any suggestions on what it "might" be will appreciated and investigated Link to post Share on other sites
Daverse 175 Posted February 19, 2012 Report Share Posted February 19, 2012 is it getting a spark? might be coil pack Link to post Share on other sites
paul-gti 0 Posted February 19, 2012 Author Report Share Posted February 19, 2012 engine was running before i removed it and fitted it within a few days, the engine didnt struggle to start, but on that note i haven't checked the condition of the pins inside the engine block connector.... Link to post Share on other sites
Recommended Posts