craggsy 91 Posted December 22, 2011 Report Share Posted December 22, 2011 Personally I would just block that off if you havent got the carbon canister and purge valve on the car.As its already blocked off on the inlet manifold just put a screw in that or abit of pipe with a screw in that Link to post Share on other sites
craggsy 91 Posted December 22, 2011 Report Share Posted December 22, 2011 I had it blocked off on my old VR6 for years Link to post Share on other sites
hawwy 0 Posted December 22, 2011 Author Report Share Posted December 22, 2011 You mean on that breather nipple? Link to post Share on other sites
hawwy 0 Posted December 22, 2011 Author Report Share Posted December 22, 2011 I blocked it off but still revs funny but done it with black tape if thats the problem on idle its slightly going up and down Link to post Share on other sites
craggsy 91 Posted December 22, 2011 Report Share Posted December 22, 2011 Yep on the crank case breather. Have you checked ALL vac hoses. I replaced all mine on the old VR6 as they can have pinholes in that you can't see Link to post Share on other sites
hawwy 0 Posted December 22, 2011 Author Report Share Posted December 22, 2011 Well when i hold rev its going up down too. Which ones are aree all hoses mate. Link to post Share on other sites
hawwy 0 Posted December 22, 2011 Author Report Share Posted December 22, 2011 Another thing i forgot to metion when i idle and goes up and down itself the lights dim and go bright too in rhythm with the rev Link to post Share on other sites
Recommended Posts