michael5556 247 Posted October 31, 2011 Report Share Posted October 31, 2011 I need some copper brake lines making up. In the Manchester area. Using mk2 stuff and getting rid of the abs.Any helps appreciated. Link to post Share on other sites
bungy 2 Posted November 1, 2011 Report Share Posted November 1, 2011 Most auto factors make them in house if you supply a "wire" and a very reasonable money wise. Also cheap and simple to make yourself. Link to post Share on other sites
michael5556 247 Posted November 1, 2011 Author Report Share Posted November 1, 2011 Don't I need pipe flaring tools and pipe bending tools to do it myself?Tps will supply a roll of the line and will also sell me the correct ends. Link to post Share on other sites
bungy 2 Posted November 1, 2011 Report Share Posted November 1, 2011 You do need a flaring tool but they are cheap. Slow and careful bending around a form means no tool needed. Auto factors will supply cut to length with the unions flared on. You then bend to shape. I did mine by hand. Link to post Share on other sites
michael5556 247 Posted November 1, 2011 Author Report Share Posted November 1, 2011 Ah ok! I might try that then! Nice on bungy! Link to post Share on other sites
Daverse 175 Posted November 1, 2011 Report Share Posted November 1, 2011 You can do it yourself with a small enough pipe bender and a pipe flaring tool. make sure the ends are double mushroom to make the proper seal. Link to post Share on other sites
michael5556 247 Posted November 1, 2011 Author Report Share Posted November 1, 2011 Ok I might do that then! Cheers guys. Link to post Share on other sites
Recommended Posts