Jump to content

chain tensioner screw test Picture and Video inside


Recommended Posts

Since the method of tensioning is via hydraulic pressure the length of adjustment as shown in your picture should be ignored, use the tensioner which show the least piston scoring (hence less chance of failure).

After re-fitting start up at idle only and ensure chain gear is without noise ,a short chain noise may be heard untill oil pressure is exerted to the rear of the tensioner.

Stephen

Link to post
Share on other sites

Since the method of tensioning is via hydraulic pressure the length of adjustment as shown in your picture should be ignored' date=' use the tensioner which show the least piston scoring (hence less chance of failure).

After re-fitting start up at idle only and ensure chain gear is without noise ,a short chain noise may be heard untill oil pressure is exerted to the rear of the tensioner.

Stephen

[/quote']

thanks for answering mate , will do tomorrow and i'll tell u if it's fine.

Link to post
Share on other sites
×
×
  • Create New...