Bangsy 0 Posted September 10, 2011 Report Share Posted September 10, 2011 Hi Guys, i have a 94 VR6 Auto which i have recently purchased. It has a starting problem which is baffling me. Sometimes when i go to start her up all the lights will come on the dash but it wont turn over nothing happens but a slight click. On other occasions it will turn over, start, rev but come to idle and cut out. I litterally have to have my foot on the accelaration pedal to the floor for her to start. It had a cobra alarm/immobilizer on which i thought was the problem i have had this cut and de installed but still getting the problem. I have had a diagnostics machine on it and had a mechanic look at it, the machine comes up with no fault and my mechanic cannot find the fault.Anyone experienced this problem or any ideas of what it could be. Any help would be appreciated Link to post Share on other sites
Ian_rogers 0 Posted September 10, 2011 Report Share Posted September 10, 2011 Try replacing ur ignition switch Link to post Share on other sites
Bangsy 0 Posted September 10, 2011 Author Report Share Posted September 10, 2011 cheers mate... would a faulty ignition switch cause the car to start rev then cut out??? Link to post Share on other sites
Ian_rogers 0 Posted September 10, 2011 Report Share Posted September 10, 2011 Yeah I had the same problem before, it's a cheap enough part to buy n try even if it doesn't resolve the issue, I imagine it will tho Link to post Share on other sites
michael5556 247 Posted September 10, 2011 Report Share Posted September 10, 2011 Sounds like an imobilizer issue. Link to post Share on other sites
Recommended Posts