kendo 0 Posted August 17, 2011 Report Share Posted August 17, 2011 Anyone remember how to program the key fob??I had the instructions years ago!! but not anymore :-(I know you plug it into the dock in the glove box, turn the ignition key to position 1, push the key fob button then turn off, but im sure there is another step or a different sequence.I know it can be done, coz I was able to do it years ago with those 'now lost' instructions!!!Cheers ;-) Link to post Share on other sites
kendo 0 Posted August 18, 2011 Author Report Share Posted August 18, 2011 *-)Anyone got any pointers *-) Link to post Share on other sites
hvr6 88 Posted August 18, 2011 Report Share Posted August 18, 2011 I think I have the manual in my box at home will check tonight :-) Link to post Share on other sites
kendo 0 Posted August 18, 2011 Author Report Share Posted August 18, 2011 Cheers Matey. I found a scan of the official manual, but it only tells you how to operate the alarm. It tells you to take it to a dealer to recode :-( Link to post Share on other sites
kendo 0 Posted August 19, 2011 Author Report Share Posted August 19, 2011 (y) SOLVED IT (y)Sat for an hour last night and tried all sorts of procedures...... disconnect then reconnect the battery, key fob docked, ignition key turned once, push key fob button once I even tried opening the drivers door at one point!!!! Whatever I done it worked, i know have a fully working conlog 900 key fob, full closure on button press Woo Hoo!! no need to stretch over the passenger seat to dock the fob everytime I want to start the car!!I know I should have wrote down each procedure, until I found the correct one. but Im happy now its all working :-) Link to post Share on other sites
hvr6 88 Posted August 19, 2011 Report Share Posted August 19, 2011 good! cos I completely forgot to look :-)yes you should have written it down! ;-) Link to post Share on other sites
pete23 0 Posted August 26, 2011 Report Share Posted August 26, 2011 Any ideas as to how you did this.Same problem and no solution!!! Need to recode mine too - any ideas Link to post Share on other sites
kendo 0 Posted August 26, 2011 Author Report Share Posted August 26, 2011 Sorry Mate, its just a case of trial & error im afraid. What is your situation though... was it working then just stopped? or has it ever worked? Link to post Share on other sites
xsjado 0 Posted July 21, 2013 Report Share Posted July 21, 2013 CAPS ARE ON LOL. ANYONE KNOW HOW TO SYNC THE FOB BEEN ALL OVER GOOGLE AND THIS IS THE CLOSES I CAN FIND TO DOING IT, STILL NO LUCK THO.Ross. cheers. Link to post Share on other sites
Recommended Posts