russj249 2 Posted May 30, 2011 Report Share Posted May 30, 2011 Where can I get them from? I have a Forge Supersize 50mm Re-circ valve so need a t-piece that's 2.5inch with a 38mm T for boost side and also a 3inch pipe with a 38mm T to re-circ back before turbo. Where can I get them from? The few I have found are a lot of money for what they are.Can either make a metal or a silicone T work.Or does anyone fancy making me a couple? Link to post Share on other sites
Antihero1981 8 Posted June 1, 2011 Report Share Posted June 1, 2011 think i have 1 t piece silicon one! Link to post Share on other sites
russj249 2 Posted June 1, 2011 Author Report Share Posted June 1, 2011 what size is the pipework that it'll fit into then? i'll be running 2.5 inch intercooler pipe work so need that with a 50mm T piece... the 3 inch one isn't as bad as i have loads of pipe left over from exhaust. so can weld up my own maybe. Link to post Share on other sites
Antihero1981 8 Posted June 1, 2011 Report Share Posted June 1, 2011 well this one was fitted to the outlet of my vf9 , if i think its the same one you after.# Link to post Share on other sites
russj249 2 Posted June 1, 2011 Author Report Share Posted June 1, 2011 Where did you get it from mate? Or are you selling it? Lol Link to post Share on other sites
Antihero1981 8 Posted June 2, 2011 Report Share Posted June 2, 2011 can sell it dude , not using it , its a samco one.....in blue.....if your interested i can measure it up tomorrow , let me know if your interested Link to post Share on other sites
russj249 2 Posted June 2, 2011 Author Report Share Posted June 2, 2011 Yes I'll have it if it's the correct size. As long as the internal diameter of the t is 50mm and I can fit it into 2.5 inch pipe obviously lol.And it's a good price too Link to post Share on other sites
Antihero1981 8 Posted June 11, 2011 Report Share Posted June 11, 2011 ok will measure up in the morning for ya Link to post Share on other sites
russj249 2 Posted June 11, 2011 Author Report Share Posted June 11, 2011 Hi mate. can't believe i never measured it! thought it was 50mm but it's actually 38mm! Link to post Share on other sites
Antihero1981 8 Posted June 12, 2011 Report Share Posted June 12, 2011 lol ok , well still need to get into garage , been pissing down here , i was thinking 50mm was big Link to post Share on other sites
russj249 2 Posted June 12, 2011 Author Report Share Posted June 12, 2011 Haha I don't know where I got it from to be honest! Was only because I was finishing my waste gate pipe into my down pipe and thought I'd see how much bigger the dump valve was compared to my 38mm waste gate!! But it wasn't lol Link to post Share on other sites
Antihero1981 8 Posted June 14, 2011 Report Share Posted June 14, 2011 dude , got it out , pm me your number and i txt you some details and pics overryan Link to post Share on other sites
russj249 2 Posted June 14, 2011 Author Report Share Posted June 14, 2011 you got PM mate Link to post Share on other sites
Antihero1981 8 Posted June 15, 2011 Report Share Posted June 15, 2011 Txt ya! lol Link to post Share on other sites
Recommended Posts