Jump to content

Recommended Posts

what could be wrong???

i have a aaa vr with coilpack,its fitted with magnecore leads and new plugs ,iv cleaned the maf,isv and throtle body this has smothend up the running of the engine but it doesnt seam to have much power ,it revs but doesnt accelerate hard from stand still or if overtaking ??is this a coilpack issue???

Link to post
Share on other sites

Before you go fitting a clutch mate do a stall test

Put it in a high gear and try pulling away (with out using the throttle and hand brake on)

It should stall as soon as you pull the clutch up if it gets quite high before it stalls or if the clutch pedal gets really high it will be the clutch

Link to post
Share on other sites

there is also a rolling slip test to compliment the stall slip test as ive had clutches slip while driving but would still stall at standing, going like 20 or 30mph in fifth to keep the revs very low just bury the throttle, the revs should build slowly and smoothly along with your speed, if the revs build quickly and/or spikily but your speed doesnt its clutch slip, basically the same thing you are experiencing except when you do it i bet youre in a low gear and higher revs, if its happening at the opposite end of the scale, high gear low revs then its definite clutch slip

Link to post
Share on other sites
×
×
  • Create New...